Skip to main content
TONY LAB AUDIO
VI
Home music room with a Yamaha drum kit, wall-mounted YME Audiotechnik CS speakers and acoustic wood panels behind.

RESIDENTIAL

Sound in Harmony With Your Home

Designed around the room, the interior and how your family listens, so the system is tidy, easy to use and well balanced.

Talk to us about your homeSee completed projects

Common home audio problems

An expensive system slowly gathering dust in the corner

Because it is too complicated for everyone at home to use

You invested a lot in the system, but every time you want to sing or watch a film you have to fumble with 4–5 devices. Older parents and young children hardly dare to touch it.

  • We integrate One-Touch control — the whole family presses one button and the system switches to the right Karaoke/Movie/Music mode in 3 seconds.
  • Smart Control
  • One-Touch Scene
  • Family Friendly
  • The whole family can run it easily

You love a refined interior, but worry the speakers will ruin it

Sound should not be something you have to hide in your own home

You put a lot of care into every interior detail, but one pair of bulky speakers and a few visible cables are enough to strip the space of the refinement your architect worked so hard to create.

  • We use studio-grade in-wall and in-ceiling speakers or imported architectural column speakers, custom-finished to match the tones of your interior.
  • Architectural Audio
  • Hidden Wiring
  • Custom Finish
  • Interior architecture left intact

You want to relax, but listening leaves you tired and uncomfortable

A living room is not a studio — it needs a different approach

Living rooms with a lot of glass and natural stone bounce the sound back, making voices heavy and prone to harsh feedback. After a while you get a headache, and the neighbours are unhappy too.

  • We survey and measure the room’s real acoustics, optimise the frequency response with dedicated DSP and place the speakers for the sweet spot where you sit most often.
  • Acoustic Tuning
  • Anti-Feedback Engine
  • DSP Calibration
  • No feedback, problem frequencies removed

The solution starts with the room itself

Each of the problems above has one root: the system was chosen by its specifications, not by how the family actually lives in that room.

Tuned to your family’s vocal range and habits

DSP Voice Tuning & Anti-Feedback

No off-the-shelf presets. Tony Lab Audio measures the room’s frequency response and tunes the DSP to the owner’s own voice: singing feels light, round and effortless, and the system is protected from feedback.

Cinema realism, hidden in the room

Dolby Atmos Immersive Audio

Coverage angles and subwoofer distances are calculated from the room’s geometry, for vivid, Hollywood-standard 3D surround sound that doesn’t crowd the room or get in the way.

Honouring natural, unadorned musicality

Audiophile Grade & Clean Power

For deep listening (Jazz, Vocal, Bolero, Classical). We choose high-fidelity equipment imported from Europe and the US, with clean power and noise-rejecting cables, so the music comes through as naturally as possible.

One integrated system for every need

Multi-Room & Smart Home Native

Seamless integration with Smart Home systems (Control4, Crestron, KNX…). Switch from a full-on home cinema to relaxed music throughout the house with a single touch on your iPad.

OUR PROCESS

Six steps for your living space

Phase 1 — Survey & Design

  1. Survey & listeningAcoustic measurement of the room, and getting to know how the family likes to be entertained.
  2. 3D simulationDrawings that simulate the coverage and show the speaker positions, prepared with your architect.

Phase 2 — Installation

  1. InfrastructureNoise-rejecting audio cabling run to standard before the interior is finished.
  2. Tidy installationThe equipment goes into the agreed positions and is checked for its effect on the look of the room.

Phase 3 — Tuning & Handover

  1. Acoustic CalibrationDSP fine-tuning, problem frequencies cut, and vocals and film dialogue optimised in the real room.
  2. “One-Touch” handover & ongoing supportSimple instructions for use, and regular maintenance visits at your home.

FEATURED PROJECTS

Home audio projects

Our work is proven by projects already completed in real homes.

A pair of YME Nano Pro line array speakers hung from the ceiling above and red YME CS 7P speakers below, tuned for a music listening room that is also a drum room in a private home.

Private Residence — Mr. Chanh

The Tony Lab Audio team installing the sound equipment cabinet in the living room of Ms. Mai’s apartment in Phu My Hung, District 7.

Private Residence — Ms. Mai

View all projects

HOME AUDIO ADVICE

Frequently Asked Questions

Our interior is already finished. Will adding a sound system spoil the space or mean breaking into the walls?

Tony Lab Audio can assess both homes under construction and homes already finished. In a lived-in home, speakers and cable routes are proposed around what is there; any work that touches the structure or the interior must be approved first by the owner and the relevant professionals.

How can one system handle easy-going karaoke and still sound smooth, not dry, for Hi-Fi music?

This is the most common challenge. Karaoke needs power and a wide range, while Hi-Fi listening needs detail and a natural character. Tony Lab Audio solves it with multi-scene configuration on a high-end imported DSP: for music, the system runs a Pure Audio mode with the shortest signal path; for karaoke, the vocal processing and anti-feedback chain switch in automatically. Everything changes at the press of a scene button.

We have elderly parents and young children. How can everyone play music or sing easily without worrying about damaging the equipment?

We keep it simple with “One-Touch” presets. Power on/off, source selection and volume can be configured around the actual equipment; volume limits are set to suit the system and the way of use agreed with you.

Does Tony Lab Audio install YME Audiotechnik speakers in homes?

Yes. Tony Lab Audio imports YME Audiotechnik directly. We have configured YME CS Series speakers with FIR filtering in a number of homes — from music listening and vocal practice rooms to systems that can expand to YME Nano Pro Line Array as needs grow.

SOLUTIONS FOR YOUR HOME

Sound Fit for the Room Easy Every Day

Send us your floor plan, photos of the interior and how you like to listen, and Tony Lab Audio will work out the right option for the room.

Talk to us about your homeMessage the audio engineer on WhatsApp